What To Do When Your iPhone 6 Won't Charge

REWA 06/22/2018

Have you met this situation that the battery power becomes less after charged one hour? This is something quite a few users complained about. While you may think that have to replace a new battery, that usually isn’t the case. So, what is causing this problem? Maybe the charging port is full of dirt or the cables may be damaged. Also, a software or hardware issue can cause this problem. Now, we have listing four common ways and a professional solution. As following.


Restart iPhone


For most non-professionals, the most common fix for issues on any computer/phone has always been to restart the device. Sometimes a program can be stuck or could be causing another issue or bug and cause kinds of types of frustration and confusion. Try restarting your iPhone first before going on to more intensive fixes.



Update iOS


When you upgrade your device, the issue will probably be gone. So if there is upgrade software, make sure you have been got. Come with following to do this.


1. Go to Settings

2.Tap General

3.Tap Software Update

4.Tap Download and Install


Clean the iPhone’s charging port


If there are any obstructions, the cable won’t be properly placed into the charging port, thus, the device won’t charge. In this case, you need to clean the charging port. In order to do this, you will need some suitable tools, such as a toothpick or a small needle. Remove all the obstructions, but make sure to do it carefully to avoid any damage.


What To Do When Your iPhone 6 Won't Charge


Try another charging and USB port


If the issue still can’t be solved after cleaned the charging port, then you can try another wall charger or use another USB cable. Plug the cable into the USB port in your computer. Maybe that will make a difference.


With these ways to fix iPhone 6 won’t charge, you will probably solve the issue. If not, then it may be a hardware issue. Let's follow REWA step by step video recording to fix iPhone 6 not charging with logic board.


Charging fault analysis


Connect ZXW to a computer, open PCB diagram software, Charging voltage input PP5V0_USB, battery voltage PP_BATT_VCC, Battery electric quantity detection BATTERY_SWI_CONN


Connect U1401, Tigris charger, USB control IC, overvoltage protection signal, U1700 damage can result in not charging, reboot and connect computer failure etc.


What To Do When Your iPhone 6 Won't Charge


Charging fault detection Open iPhone 6 screen, take down the screen, pull up the battery connector from logic board. The voltage is about 2.0V after measurement through stitch battery is ok.


What To Do When Your iPhone 6 Won't Charge


Plug to charger, the voltage is 0.5V(normal 1.8V - 4.2V) after measurement through FPC connector, the logic board can't charge.Repair: Take out the logic board, fix the logic board with PCB holder. Blow the shield cover with 320℃ air hot gun and take off it.


What To Do When Your iPhone 6 Won't Charge


After blowing for 1 minute at 240℃, scrape off the black adhesive.


What To Do When Your iPhone 6 Won't Charge


Blow the Bonding Pad for 1 minute at 300℃ until the tin melts. Pry the chip with sculpture knife, apply some Paste Flux, remove the tin on bonding pad, apply some rosin on the Solder Wick and slick Bonding Pad.


What To Do When Your iPhone 6 Won't Charge


Clean the Bonding Pad with PCB Cleaner, align the new chip in right direction through stitch.


What To Do When Your iPhone 6 Won't Charge


Blow the chip with hot gun for 1 minute at 280℃. Install the logic board after cool down


Detection and troubleshoot


Plug in charge, the voltage ranges between 1.8V and 4.2V indicating charging IC works properly, install the LCD and charge, after 1 hour the battery can charge properly.


What To Do When Your iPhone 6 Won't Charge


Make sure you bookmark this page so it will be easier for you to find it in the future when you need help. If you have any problems please comment at below or directly email to sales@rewatechnology.com. We will try to reply in time.


Click to watch the video and repair your iPhone 6 not charging by DIY



If you are interested in the tools used in the video, please go to our online store to order. Each replacement part has gone with REWA's strict tests and systematic packing process, so each cell phone spare part is of guaranteed performance and low price. And worldwide shipping on rewatechnology.com


You may also like:


How to fix no service on iPhone 6

How to fix iPhone won't turn on

How to repair iPhone 7 touch screen not working



Write a comment
Comment

No Comments

For this Article

0

0

Share

The Latest

ABOUT REWA

REWA is a world leading electronics repair business solutions provider who was founded in 2008 in HongKong. We are committed to delivering one-stop services covering Sourcing Solution, Technical Support Solution as well as Recycle & Resell Solution.

FOLLOW REWA